Apartment on 1st floor of 2 with 3 bedrooms
€225,000 + VAT 103.92 m2
Property details
- Property ID: 1892
- Property Type: Apartment
- Price:€225,000
- Price per m2: €2,165
- Price per indoor m2: €2,619
- Floor:1/2
- Indoor area:85.92 m2
- Total area:103.92 m2
- Covered terrace area:18.00 m2
- Bedrooms: 3
- Bathrooms: 2
Description
TECHNICAL SPECIFICATIONS
BEARING STRUCTURE
Construction of reinforced concrete with cube 37 strength concrete and reinforcing steel B500c based on Eurocode.
WALL STRUCTURE
External walls 25cm from thermo-insulating bricks U= 0.692W/m2K and internal walls 10cm. The walls will be reinforced and connected with the main structure.
COATINGS AND PAINTS
Two coats of plaster on all wall structures followed by three coats of finishing and three coats of A’ quality interior paint. All interior and exterior ceilings will be exposed fair faced concrete. Decorative plasterboard with lighting will be installed in the kitchen area.
THERMAL INSULATION
Externally, the building will be covered with 8cm and 3cm thick expanded polystyrene in all frames. It will then be coated with three coats of plaster reinforced by glass mesh followed by 2mm silicone graffiato paint. All of the above, will meet all energy efficiency regulations.
WATERPROOFING INSULATION
Bituminous insulating material will be used in all structural elements that are in contact with the humidity of ground. Under the floors of all the verandas, roof gardens as well as all w/c rooms will be insulated with triple layer of elastic spreadable cementitious mortar which is comprised of reinforced glass mesh. The rest of the floor tiling will be applied with three coats of reinforced polyurea waterproofing material.
FLOOR AND WALL TILING
All internal floors will be covered with ceramic tiles of a purchase value €18/m2 including common areas, terraces, roof garden and staircase. The floors and walls of the W/C rooms will also be lined with the above ceramics. All of the above will be applied with a high quality C2TES1 cement-based resin adhesive. All ceramic tiles shall be procured from a supplier pre-specified by the contractor.
SANITAREWARE
All sanitaryware and accessories will be of high quality and will be supplied by a supplier pre-specified by the contractor with a total value of €1500 excluding VAT and will include:
Two toilet bowls with hidden mechanism
Two sinks and mixers
Two shower sets, mixers and siphons
Granite type kitchen sink and mixer
All showers will be made of ceramic tiles.
ELECTRICAL INSTALLATION
The electrical installation will be made in accordance with the current regulations of the EAC and will be enclosed. Pipes and cables of excellent quality will be used, and the building will be supplied with electricity necessary to its needs.
The electrical installation is indicated in the electrical plans. In the common areas, lighting with a timer and an intercom will be installed.
HYDRAULICS
The hydraulics include drains and piping for cold and hot water as well as the installation of all sanitary items.
The hydraulic installation is indicated in the engineering plans.
Each apartment will have its own solar water heating system accompanied by an inverted type pressure.
AIRCONDITIONING
Piping and cabling hidden provisions will be installed based on engineering plans. The purchase of the air conditionings is borne by the buyer.
WOODWORKS
Intermediate doors and 30-minute fire rated entrance doors shall be installed in accordance with Fire Service requirements. Wardrobes with three drawers will be installed in the rooms as well as a hanging sink unit with drawers in the w/c rooms.
The kitchen as well as the island will be built as indicated in the decorative plans.
All of the above will be covered with melamine from ALPHA WOOD GROUP chosen by the buyer.
The kitchen, the island and the hanging sink furniture will be covered with a thick techno granite.
PHOTOVOLTAIC
Provision for a photovoltaic system will be installed to the common areas. Also in all parking areas there will be provision for the installation of an electric vehicle charger.
ALUMINIUM
MUSKITA company aluminium frames will be installed in all exterior openings based on plans. The MU2075 series will be used for the opening ones and the MU114 series for the sliding ones. The above series meet all energy efficiency and thermal insulation specifications.
All of the above will be accompanied with double layer of 4 mm energy efficiency glasses.
The colouring of all the above will be charcoal.
ELEVATOR
An elevator with capacity of 8 people, speed of 1 m/s and a cabin size of 110 x 140 cm will be installed based on the specifications of the Urban Planning Authority.
ROOF GARDEN
The area of the two roof gardens will be covered with ceramic tiles of a purchase value of €20/m2. The perimeter of the space will be surrounded by glass balustrade and fair faced parapets based on architectural designs. Provision for a jacuzzi and grill will be installed as well as a metallic pergola with epoxy paint as indicated in the architect’s plans.
COMMUNAL AREA
One parking space, one mailbox and one storage room will be provided for each apartment in the ground floor. A W/C room will also be built on the ground floor. Landscaping as shown in the drawings will be done.
Distances
Features
- Side sea view
